Table of Contents
Advertisement
Regulatory Information
The SkyWay Series Wireless Bridge/Router operates in the 2.4 GHz band, complies
with the IEEE 802.1D MAC bridging standard and supports SNMP monitoring if IP
routing is enabled.
Federal Communications Commission (FCC) Radio
Frequency Interference Statement
This device complies with Part 15 of FCC Rules. Operation of this device is subject to
the following two conditions:
• It may not cause harmful interference.
• It must accept any interference that may cause undesired operation.
Information to the User
In order to comply with FCC RF exposure requirements, a minimum separation dis-
tance of 27 in. must be maintainted between the antenna and any persons. When
installing the antenna, ensure that this clearance is maintained while the product is in
operation.
This device must be installed and used in strict accordance with the manufacturer's
instructions. However, there is no guarantee that interference to radio communica-
tions will not occur in a particular commercial installation. In case the device does cause
harmful interference with an authorized radio service, the user/operator shall promptly
stop operating the device until harmful interference has been limited. Solectek Corpo-
ration is not responsible for any radio or television interference caused by unautho-
rized modification of this device or the substitution or attachment of connecting cables
and equipment other than specified by Solectek Corporation. The correction of inter-
ference caused by such unauthorized modification, substitution, or attachment will be
the responsibility of the user.
i
Advertisement
Table of Contents
