Interface Specifications And Pinouts - Solectek skyway series User Manual

Appendix C: Appendix C:
Appendix C: Appendix C:
Interface Specifications and Interface Specifications and
Interface Specifications and Interface Specifications and
Pinouts Pinouts
Pinouts Pinouts
Caution
The SkyWay bridge/router uses these cables:
• an LMR-400 RF cable connects to the antenna
• a DC Power cable connects to an DC converter inside the building
• an Administration Console (serial) cable connects to a terminal, workstation,
or dedicated modem inside the building
• either a 10 Base-T/100 Base-TX or 100 Base-FX Ethernet cable connects to a
LAN server inside the building
Although Solectek does not recommend it, you may find it necessary to cut the con-
nectors off the cables so that you can feed the cables through conduit in the roof inside
the building. Cut only the connectors on the indoor
directly to the SkyWay) from the ends of the DC power cable, serial cable, and 10
Base-T/100 Base-TX Ethernet cables only - never
fiber optic cable. After feeding the cable through the conduit, use the pinout informa-
tion provided in this Appendix to reattach the connectors to the cables.
indoor side (not those that connect indoor indoor
never cut the RF cable or the 100 Base-FX never never
181