Setting Up Static Routing; Ip Static Routes Configuration - Solectek skyway series User Manual

IP Routing
Note

Setting up Static Routing

Set up IP static routes in 1.4.3 IP Static Routes Configuration, described in detail on
page 97.
For more information about IP Static Routes, see Static Routing is the Best Choice for
Service Providers, a white paper published by Solectek.

1.4.3 IP Static Routes Configuration

1.4.3. IP Static Routes Configuration *
Network Address Network Mask
--------------- ---------------
200.100.100.000 255.255.255.000
\ - return to menu
Field Name
Network Address
The destination IP address.
Network Mask
The destination network subnet mask.
Gateway Address
The IP address of the gateway to use as the next hop.
Prt
The physical port number that is used to reach the gateway address.
Gateway Address
---------------
196.028.145.069
. - commands TAB - next available field
MIB
[swIpRouteNetAddr]
[swIpRouteNetMask]
[swIpRouteGateway]
[swIpRouteIndex]
Record 0 of 0
Rte Over Record
Prt Cost Ride Type
--- ---- ---- ------
3 2 True Valid
ENTER - edit
Settings (defaults in
bold)
3
97