Table of Contents
Advertisement
Intended Audience
Note
2
This Users' Guide contains everything you need to know to prepare for installation,
install, and configure a SkyWay Wireless Bridge/Router. It assumes the following:
• You are functioning in an Information Services or Building Facilities capacity
• You have more than one year's experience with networking, either wireless or
traditional
• You are familiar with basic networking concepts such as bridging, IP routing,
WAN protocols, etc.
• You are familiar with your LAN or WAN's topology, configuration, and design
• If you will be using Simple Network Management Protocol to manage SkyWay,
you are familiar with the protocol's terms and usage
• You are familiar with basic RF/wireless network design, even if you are not
familiar with the particulars of any specific system
If you do not have the knowledge listed above, we recommend that you hire a con-
sultant to assist you with installing and configuring your SkyWay and network.
Advertisement
Table of Contents
