Tftp Status; Configuring The Tftp Server On Skyway - Solectek skyway series User Manual

File Transfer Utilities

TFTP Status

The 3.1.1.1 TFTP Server Configuration screen is also a status screen that provides
information about the current or last file transfer that occurred on the SkyWay TFTP
server.

Configuring the TFTP Server on SkyWay

Use 3.1.1.1 TFTP Server Configuration screen to set up the SkyWay as a TFTP Server.
3.1.1.1 TFTP Server Configuration
3.1.1.1 TFTP Server Configuration
Server Status :
Time_out :
Current State :
Current File :
Read Requests :
Write Requests :
Aborted Sessions :
Reset Statistics :
\ - return to menu
The following table lists the field name, MIB, and the settings (default in bold):
Field Name
Server Status
Set Server Status to Enabled or Send only to configure the SkyWay as a TFTP
server. Send only means the TFTP server is enabled to send files only and cannot
receive files.
Time_out
The amount of time in seconds the TFTP Server will wait before a timeout occurs.
For example, if the server sends a packet and it is not acknowledged by the client
before the timeout expires, the server shuts down the connection.
Disabled
20
Idle
Use Filename
0
0
0
No
. - commands TAB - next available field
MIB
[swTFTPServerStatus]
[swTFTPServerTO]
ENTER - edit
Settings (default in
bold)
• Enabled
• Send only
• • • • Disabled Disabled
Disabled Disabled
20
119