Table of Contents
Advertisement
20
Option
Serial Port
Serial Transceiver
Ethernet Port
Ethernet Transceiver
Bios System Configuration
Use this screen to check your system configuration and to change the Bios Timeout
default.
1.1. System
Product Code
Board Revision
Software Version
Media Type
RF Power Type
VCO Type
SDRAM Size
Flash Size
Serial Number
Country Code
MAC Address
Bios Timeout (sec)
\ - return to menu
The Bios Timeout sets the default number of seconds the system waits to allow you to
press a key to load the Bios Application. The range is 5 to 120 seconds.
See Runtime Screen
"1.2.1.1 Serial Port Con-
figuration" on page 24
"1.2.1.2 Serial Transceiver
Configuration" on
page 25
"1.2.2.1 Ethernet Port
Configuration" on
page 83
"1.2.2.2 Ethernet Trans-
ceiver Configuration" on
page 85
: SkyWay Bridge
: Version 1
: Bios Version 00.31A-T
: Twisted-pair
: Low Power
: Package
: 16 Megabytes
: 4 Megabytes
: 0
: U.S.
: 00:c0:61:00:00:00
: 5
. - commands
TAB - next available field
ENTER - edit
Advertisement
Table of Contents
