Connecting An Antenna - Solectek skyway series User Manual

Connecting Cabling
To connect an RF
cable:

Connecting an Antenna

The LMR-400 RF cable connects the SkyWay with the antenna above it on the mast.
1.
Making sure the threads are properly aligned, tighten the cable's connector bolt
snugly over the SkyWay's RF connector port using a 13/16 in wrench. Hand-
tighten another 1/4 turn to lock it in place.
2.
Similarly connect the other end of the RF cable to the antenna's connector.
Note: Allow sufficient slack in the cable for a maximum turning radius of 1 ft.
3.
Seal the connections to both the antenna and the SkyWay with "Coax Seal"
(P/N 10702) to prevent water entry.
Antenna Antenna Antenna Antenna
Slack for 1 ft turning radius Slack for 1 ft turning radius Slack for 1 ft turning radius Slack for 1 ft turning radius
www.solectek.com
LMR-400 cable LMR-400 cable LMR-400 cable LMR-400 cable
49