Connecting To Power - Solectek skyway series User Manual

To connect SkyWay
to power:
50

Connecting to Power

SkyWay requires DC power to operate. Solectek supplies an AC-to-DC converter
and a weather-rated DC power cable.
1.
Connect the power cable's 3-pin connector to the SkyWay power port. Plug in
and lock clockwise.
Power port Power port Power port Power port
Drip loop and Drip loop and
Drip loop and Drip loop and
Cable slack Cable slack Cable slack Cable slack
2.
Connect the opposite (indoor) end to the supplied AC/DC converter.
Conduit Conduit
Conduit Conduit
or routing or routing or routing or routing
exit exit exit exit
Cable from roof Cable from roof
Cable from roof Cable from roof
AC/DC converter AC/DC converter
AC/DC converter AC/DC converter
Note: For extra power protection, plug the AC power cord into a UPS (200 W
minimum).
Antenna Antenna
Antenna Antenna
www.solectek.com
AC source AC source AC source AC source
LMR-400 cable LMR-400 cable
LMR-400 cable LMR-400 cable
AC power cord AC power cord
AC power cord AC power cord