Performing The Bench Test - Solectek skyway series User Manual

Bench Test
Step One:
Connecting
Components

Performing the Bench Test

Use the following to connect the components in a bench test environment. There are
two possible scenarios:
Terminal or PC
Console cable
Serial port
Ethernet Port
Test Antenna
4
SkyWay 1
Scenario 1: Two SkyWay units connected to two terminals or PCs
Console cable
Serial port
Ethernet Port
4
test antenna
SkyWay 1
Scenario 2: Two SkyWay units Connected to One PC
1.
Position two SkyWays side by side.
2.
Connect the DC power cables to the rear panels of the SkyWays. Connect the
other ends to two AC/DC converters. Plug in the converters to power.
3.
Connect two console cable connectors to the rear panels of the SkyWays. Con-
nect the opposite ends (RS-422/RS-232 converters) to the COM1 ports of two
computer workstations or to the COM1 and COM2 ports on one computer
workstation.
4.
Connect the test antenna to the RF ports of the SkyWays.
3
Terminal or PC
2
AC/DC converter
Ethernet Port
Power cable
4 Test Antenna
DC Power
connector
1
COM1
COM2
3
PC running
Hyperterm
2
AC/DC converter
Ethernet Port
Power cable
4
test antenna
DC Power
connector
1
3
Console cable
2
Serial port
Power cable
DC Power
connector
SkyWay 2
1
3
Console cable
2
Serial port
Power cable
DC Power
connector
SkyWay 2
1
AC/DC converter
AC/DC converter
33