Configuring Skyway; Configuration Features Available - Solectek skyway series User Manual

Configuring SkyWay

58
SkyWay configuration can be divided into this sequence:
• Configuring System, Network Management, and User parameters
• Configuring the Port Parameters, which includes the RF Link Layer
• Configuring for Bridging and Spanning Tree
• Configuring for IP Routing
For many of the parameters, you can simply accept the default values. In this Guide,
each configuration parameter is described in a table following the screen. The table
includes the field name, MIB OID, and valid configuration settings, with the default set-
ting in bold if applicable.

Configuration Features Available

The following table provides an overview of the configuration features available from
both the Administrative Console and SNMP for each of the SkyWay's major functions:
Function Function Console Console
Function Function Console Console
Network Man-
agement System,
Date and Time
Network Man-
agement Secu-
rity, Adding Users
Port Configura-
tion
Configuring for
Bridging
Configuring for
Routing
Configuration
Summary
SNMP SNMP
SNMP SNMP
X Allows you to configure the network
X
management system, date and time.
X Screens 1.1.1 Network Management
Security and 1.1.3 User Access Con-
figuration Menu are not accessible via
SNMP .
X X Allows you to configure the serial
port, Ethernet port, RF ports, and
manually accept sub stations.
X X Allows you to configure bridging and
spanning tree operations.
X X Allows you to enable and configure IP
routing
X X Allows you to obtain a summary of
system configuration, bridge configu-
ration, and router configuration.
Comment Comment
Comment Comment