7002901: 12 dBi 110 ° Outdoor Sectorial Antenna
Specifications (Continued)
Wind loading @ 140 mph
Elevation adjustment
Size
Weight
Radome
Reflector material
Mounting hardware
Mast diameter
Wall Mount
Note.
Since the antenna must be mounted above the SkyWay, do not use the wall
mount if the SkyWay is mounted on a mast.
1.
Prepare the wall as necessary (e.g., measure and drill holes, set screw anchors).
2.
Attach the two mounting brackets to anchor the frame at top and bottom.
3.
Insert and tighten two screws through pre-drilled mounting holes.
Mast Mount
1.
Attach the two mounting brackets to anchor the frame at top and bottom.
2.
Attach the antenna to the mast with two hose clamps seated in grooves on the
brackets.
3.
Tighten the clamps.
6.6 lbs (2.99 kg)
n/a
20 in x 2 in x 1.2 in
(508 mm x 50.8 mm x 30.48 mm)
0.55 lbs (.25 kg)
ASA, UV stabilized
Powder-coated aluminum
stainless steel worm-type clamp
.75 in to 3.0 in (19.05 mm to
76.2 mm) OD pipe
227