7002401: 11 dBi Omni Directional Antenna
Specifications (Continued)
Radome
Mounting hardware
Mast diameter
Wall Mount
Note.
Since the antenna must be mounted above the SkyWay, do not use the wall
mount if the SkyWay is mounted on a mast.
1.
Prepare the wall as necessary (e.g., measure and drill holes, set screw anchors).
2.
Use two screws to attach the bracket to a backplate, then attach the back plate to
the wall
Mast Mount
Use the bracket and U-bolt assembly to attach the cable to the mast.
UV stabilized fiberglass
Galvanized and stainless steel clamp
.75 in to 2.0 in (19.05 mm to
50.8 mm OD pipe
217