Bridge Configuration - Solectek skyway series User Manual

Note
90

1.3.1 Bridge Configuration

1.3.1. Bridge Configuration
Bridging
Forwarding Table Timeout :
Spanning Tree
Bridge Priority
Bridge Max Age
Bridge Hello Timeout
Bridge Forward Delay
Multicast Address
\ -return to menu . - commands TAB - next available field ENTER - edit
Use this screen to set global bridging parameters, disable bridging, or enable the Span-
ning Tree function.
The SkyWay does not support Port Priority [dotIdStpPortPriority] as defined in
RFC1493.
The following table lists the field name, the MIB name, and the default setting:
Field Name
Bridging
Enables or disables bridging on the system. If you disable bridging on this screen, it is
disabled for all ports. If you change this parameter, you must reset the unit. Bridging
supersedes spanning tree function, that is, if you disable bridging, spanning tree is
also disabled.
Fowarding Table Timeout
The timeout period in seconds for aging out dynamically learned forwarding infor-
mation.
Spanning Tree
Enables or disables spanning tree function.
: Enabled
300
: Enabled
: 16961
: 20
: 2
: 15
: 01:80:c2:00:00:00
MIB
[swBridgeEnable]
[dotldTpAgingTime]
[swBridgeSTPEnable]
Settings (default in
bold)
• • • • Enabled Enabled Enabled Enabled
• Disabled
300
• Enabled
• • • • Disabled Disabled Disabled Disabled