Mounting the SkyWay Unit
To mount the
SkyWay to a mast:
Use the third central pair
of slots for seating a third
clamp if you want extra
clamp security.
42
Mount The SkyWay Bridge/Router to an outdoor mast or wall.
Mounting to a Mast
Tools:
Tools:
Tools:
Tools:
• 13 mm hex socket wrench
• Slotted screwdriver
1.
Place the mast-mounting bracket on a table with the flat side down.
P/N 1225401
P/N 1225401
P/N 1225401
P/N 1225401
P/N 1225001
P/N 1225001
P/N 1225001
P/N 1225001
2.
Thread two clamps into the outside pair of slots on the bracket. Make sure to
thread them in the same direction.
3.
Place the SkyWay face down. Place the bracket and clamp assembly over the rear
of the SkyWay so that the four mounting holes align.
4.
Place one spring lock washer (P/N 1225201) on each mounting bolt.
5.
Using a 13 mm hex socket wrench, tighten a bolt and washer into each hole of the
bracket to a maximum torque of 15-20 ft-lbs (to prevent stripping).
P/N 1225501
P/N 1225501
P/N 1225501
P/N 1225501
P/N 1225201
P/N 1225201
P/N 1225201
P/N 1225201