Table of Contents
Advertisement
Bridging Screens
Bridging Screens
Checking Bridge and Spanning Tree Status
The 2.3.1 Bridge and Spanning Tree Status screen is divided into two parts:
• Bridge Status shows you the bridge settings
• (If Spanning Tree is enabled) Spanning Tree Status shows you the settings for
the Spanning Tree.
2.3.1 Bridge and Spanning Tree Status
2.3.1. Bridge & Spanning Tree Status
Bridge Status
-------------
Bridge MAC Address
Number of Bridge Ports :
Bridging Type
Root ID
: 4241 00:ba:d0:ba:be:00
Root Port
: 0
Root Cost
: 0
Maximum Age
: 20
Hello Time
: 2
Hold Time
: 1
Forward Delay : 15
Time Since Last Topology Change :
Topology Changes
\ - return to menu
Field Name
Bridge MAC Address
The MAC address used by the bridge as its unique identifier. The bridge MAC
Address concatenated with Bridge Priority creates a unique Bridge ID which the
Spanning Tree Protocol uses.
Number of Bridge Ports
Minimum of 2 per unit, the Ethernet and the RF ports. On the base station, the
number of bridge ports is equal to one plus the number of base sub ports.
:
00:ba:d0:ba:be:00
2
:
Transparent only
Spanning Tree Status
--------------------
Bridge Priority
Bridge Max Age
Bridge Hello Time
Bridge Forward Delay : 15
Forward Table Timeout: 300
2108
:
1
. - commands
TAB - next available field
MIB
Bridge Status:
Bridge Status:
Bridge Status:
Bridge Status:
[dot1dBaseBridgeAddress
]
[dot1dBaseNumPorts]
: 16961
: 20
: 2
ENTER - edit
Comments
149
Advertisement
Table of Contents
