7002601: 17 dBi Outdoor Flat Panel Directional Antenna
Specifications (Continued)
Size
Weight
Radome
Reflector material
Mounting hardware
Mast diameter
Wall Mount
Not available.
Mast Mount
Note:
Use a 9/16 in wrench to tighten the bolts.
1.
Use four bolts to attach the lower part of the bracket to the square antenna.
2.
Adjust the tilt on the center section using the 2 bolts.
3.
Use four bolts to anchor the bracket to the mast with two U-bolts.
.75 in to 3.0 in (19.05 mm to
76.2 mm) OD pipe
221