7002501: 16 dBi Outdoor Flat Panel Directional Antenna
Specifications (Continued)
Radome
Reflector material
Mounting hardware
Mast diameter
Wall Mount
Note.
Since the antenna must be mounted above the SkyWay, do not use the wall
mount if the SkyWay is mounted on a mast.
1.
Prepare the wall as necessary (e.g., measure and drill holes, set screw anchors).
2.
Use four screws to attach the provided wall mount to the wall.
Mast Mount
1.
Attach it to the mast with a U-clamp.
2.
Tighten the clamp with your fingers.
.75 in to 3.0 in (19.05 mm to
76.2 mm) OD pipe
219