Table of Contents
Advertisement
RF-DLC Screens
Checking the RF Signal Status
You can check the RF signal status for the RF Base Sub Ports.
2.5.4 RF Signal Status
2.5.4. RF-DLC Signal Status
Signal
Port
Level (-dBm)
Level (-dBm)
----
------------
------------
256
95
\ - return to menu
Field Name
Port Number
The port number of the unit for which you are viewing this status.
Signal Level (-dBm)
The detected signal level for this port. For example, a value of 55 is -55 dBm.
Noise Level (-dBm)
The detected noise level for this port. For example, a value of 85 is -85 dBm. A
value of 95 is no noise detected.
Signal/Noise (dB)
The signal to noise ratio. The value indicates Noise Level minus Signal Level.
Noise
Signal/Noise (dB)
-----------------
95
. - commands
TAB - next available field
MIB
[swSignalStatusIndex]
[swSignalStatusSig-
nalLevel]]
[swSignalStatus-
NoiseLevel]
[swSignalStatusSignal-
ToNoise]
Record 0 of 0
Rcv Timeouts/Sec
----------------
0
0
ENTER - edit
Comments
147
Advertisement
Table of Contents
