Table of Contents
Advertisement
Steps for
minimizing or
eliminating radio
and television
interference:
ii
• Change the channel
• Reorient the radio or TV receiving antenna.
• Relocate the computer and SkyWay Series Wireless Bridge/Router unit with
respect to the receiver.
• Plug the computer and SkyWay Series Wireless Bridge/Router into a different
outlet so the computer and bridge/router are on different branch circuits.
If necessary, consult the dealer or an experienced radio/TV technician for additional
suggestions. You may find the booklet called "How to Identify and Resolve Radio-TV
Interference Problems" prepared by the Federal Communications Commission helpful.
The booklet is available from the U.S. Government Printing Office, Washington, D.C.,
20402, as stock number 004-000-00345-4.
This product was FCC certified under test conditions that included the use of shielded
I/O cables and connectors between system components. To be in compliance with
FCC regulations, the user must use shielded cables and connectors and install them
properly.
Radio Transmission Notice
This product is a low power (less than 1 Watt), direct-sequence, spread-spectrum
radio system pre-set to transmit and receive signals in the 2.4-2.4835 GHz frequency
band. This product has been certified by the U.S. Federal Communications Commis-
sion for use in the United States of America in that band. The manufacturer makes no
representation as to the availability of the above-mentioned frequency band for such
use in other countries.
Any prospective user of this product outside the United States of America should, prior
to such use, contact the government department or other agency responsible for
assigning radio frequencies in the country in which use is proposed to determine
whether such department or agency has any objection to operation of the product in
the 2.4-2.4835 GHz band, and whether there are any other local devices generating
signals in that band which might be expected to interfere with the operation of this
product.
The manufacturer shall not be responsible for any operation of this product which is in
violation of local law, creates interference harmful to other local devices, or results in a
malfunction of this product caused by outside interference.
End User License Agreement
Notice:
Read below before installing and using this device. Installing and using this
device indicates your acceptance of these terms and conditions. If you do not accept
the terms, you must return the unused device and all related software immediately.
You may not use, copy, modify, or transfer the enclosed device, related documenta-
tion, or any software programs residing in or included with the device (collectively, the
"product"), except as expressly provided in this license.
Advertisement
Table of Contents
