Table of Contents
Advertisement
File Transfer Utilities
Note
Field Name
File Name
The file name of the file to be transferred. The Xmodem screen does not have the
File Name field.
Status
The current status of this file transfer.
Bytes Transferred
Counts the number of bytes as the file is currently being transferred and dynamically
displays it. If there is not a current transfer running, the number of bytes transferred
in the last file transfer is displayed.
Number of Retries
The number of retries for the current or last file transfer.
Error Message
A text message which displays the reason the file transfer failed.
Uploading a New Software Version
This procedure describes how to upload a new software version to the SkyWay
Bridge/Router, and assumes you are running the SkyWay Administrative Console in a
HyperTerminal window using the Ymodem protocol.
1.
From the SkyWay main menu, go to screen 3.1.2 - Ymodem File Transfer.
Follow steps 2 and 3, even if the screen appears to have the correct values, or the file
transfer might not take place properly.
2.
Enter the following values in the fields:
Port Number: 1 (this is non-configurable, 1 is the serial port).
File Type: Runtime Application
MIB
[swYmodemFileName]
[swXmodemStatus]
[swYmodemStatus]
[swXmodemBytesTrans-
ferred]
[swYmodemBytesTrans-
ferred]
[swXmodemNumRe-
tries]
[swYmodemNumRetries]
Settings (default in
bold)
• Receiving
• Transmitting
• Failed
• Idle
0 – 4,294,967,295
0 – 4,294,967,295 (only
after an error)
115
Advertisement
Table of Contents
