Bridge Port Configuration - Solectek skyway series User Manual

92

1.3.2 Bridge Port Configuration

1.3.2. Bridge Port Configuration
Port Bridging
Number State
------ --------
2 Enabled
256 Enabled
\ - return to menu
Use this screen to configure the port for bridging.The following table lists the field
name, the MIB name, and the default setting:
Field Name
Port Number
This is the port number used as a bridging port.
Bridging State
Specify if bridging is enabled or disabled for this port. This controls the port's bridg-
ing operation if Spanning Tree is disabled.
STP State
This is a status field which tells you the current state for this port. For example, in the
screen above, both ports are in the Forwarding state.
STP Port Cost
Determines the cost of the path to the root through this port.
STP
State
--------
Forwarding
Forwarding
. - commands TAB - next available field
MIB
[swBridgePortIndex]
[swBridgePortBridging-
State]
[swBridgePortSTPState]
[swBridgePortSTPCost]
Record 1 of 1
STP Port
Cost
--------
10
100
ENTER - edit
Settings (default in
bold)
• Enabled
• Disabled
• Disabled
• Blocking
• Listening
• Learning
• Forwarding