System Status and Control Screens
System Status and Control Screens
Note
System status includes an overview of the system and SNMP Statistics.
Taking a System Snap Shot
You can access the 2.1.1 General Status and Control screen to view you system's
hardware configuration. You can also use this screen to change the Watchdog timer,
which is the only configurable field on this screen.
If you are accessing this screen using an SNMP Manager, you cannot change the
Watchdog timer.
2.1.1 General Status and Control
2.1.1. General Status and Control *
Product Code
Serial Number
Board Revision
Software Version
Media Type
RF Power Type
County Code
Antenna Type
DRAM Size
DRAM Usage (bytes)
FLASH Size
FLASH Usage (bytes)
VCO type
Operational for
Last Failure Reason
Watchdog Timeout
\ - return to menu
:
Skyway Bridge
:
12
:
Version 1
:
Version 1.0
:
Twisted Pair
:
High Power
:
United States
:
No antenna
:
32 Mb
:
4258216
:
8 Mb
:
2589520
:
Package
:
22000
:
No crash dump
:
200010
0 - watchdog timer off
each unit is 1.5ms
. - commands
TAB - next available field
ENTER - edit
127