ABB REG670 Commissioning Manual page 81

1MRK 502 073-UUS A
Generator protection REG670 2.2 ANSI and Injection equipment REX060, REX061, REX062
Commissioning manual
Calibrating injection based sensitive rotor earth fault protection
1. To view the reports, go to the Auditing tab.
GUID-8348F60B-9BF5-4018-9740-0FA3371B0F9F V1 EN-US
Figure 15: Auditing tab
2. Open and view each report.
3. View reports in one of the following ways:
• In the short cut menu, right click and select View report.
• Click the View report button in the upper right corner of the auditing
screen.
• Double click a report record.
4. Delete reports in one of the following ways:
• In the short cut menu, right click and select Delete report.
• Click the Delete report button in the upper right corner of the auditing
screen.
• Select a record with the mouse cursor then press the Delete key on the
keyboard.
5. Generate logs in one of the following ways:
• In the short cut menu, right click and select Generate log.
• Click the Generate log button.
Besides generating a report you can also generate a log file with the same
information as for the report. Open and see the details of the file in Notepad or
MS Excel.
After a successful generation of the log, the system confirms with a message
along with the path of the log file.
Section 6
IEC11000049-1-en.vsd
75