Synchronizing System Time - Polycom RMX 1000 Getting Started Manual

Parameter
Register to Server
Primary
Server/Alternate
Server
Server Address
Server Port
Server Domain
Name
User Name
Password
Outbound Proxy
Server
8 Click the OK button to complete the configuration.

Synchronizing System Time

Before holding a conference using the RMX 1000 system, you need to
first synchronize the system time to ensure that the conference sched-
uling time is consistent with your local time.
Description
Specifies whether to register RMX 1000 to the
specified SIP server. You need to set the SIP server
related parameters after this function is enabled.
Displays the registration status of the SIP server.
When registration of the preferred server fails, the
alternate server will function as the current in-use SIP
server.
Provides the IP address of SIP server for registration
service.
Provides the connection port of SIP server for
registration service.
Provides the domain name of SIP server for
registration service.
User name provided by the SIP server for the
registered user.
Password corresponds with the user name.
For communication with the SIP server when the RMX
1000 system is configured on the internal network, an
outbound proxy server is required to implement
traversal of the firewall/NAT. In this case, you need to
set the IP address and port number for the outbound
proxy server.
15