Call Wait Tone On/Off; Local Ringback Tone On/Off - Sagem RT3000 User Manual

Parameters in the file para.ini: advanced configuration
Section: DIALING
Meaning
Fast Dialling Port A
Dial timeout in 10ms
Fast Dialling Port B
Dial timeout in 10ms

16.17 Call Wait Tone On/Off

Calls that come in during an active connection can be signalled by the Call Wait
Signal. This function can be switched on or off for both ports separately.
When activated this function can only take effect when it is supported by the network
and your subscription.
Section: DIALING
Meaning
CallWait tone
generated on port A
CallWait tone
generated on port B

16.18 Local Ringback tone on/off

The Ringback tone is the tone you can hear when making a call after you have dialled
the telephone number and when the called remote station is ringing. By default this
tone will be generated by the network. If you want that the Ringback tone is generated
by the SAGEM RT3000 set the following parameter to YES:
CHx_LOCAL_CALL_CTRL=YES.
Section: DIALING
Meaning
Local RingBack
generated
Local RingBack
generated
96
Parameter
CHA_FAST_DIAL
CHA_DIAL_TIMEOUT
CHB_FAST_DIAL
CHB_DIAL_TIMEOUT
Parameter
CHA_LOCAL_CALL_WAIT
CHB_LOCAL_CALL_WAIT
Parameter
CHA_LOCAL_CALL_CTRL
CHB_LOCAL_CALL_CTRL
Permitted
Values
YES, NO
YES, NO
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
Can be configured by DTMF (see page 80)
Permitted
Values
YES, NO
YES, NO
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
Permitted
Values
YES, NO
YES, NO
Factory Setting
NO
600
NO
600
Factory Setting
NO
NO
Factory Setting
NO
NO
SAGEM RT3000