Call Forwarding If Busy (Cfb); Call Forwarding If No Answer (Cfnry) - Sagem RT3000 User Manual

Configuration
8.3.2

Call forwarding if busy (CFB)

If Call forwarding if busy is activated, incoming calls will be forwarded to the configured
telephone number, if the SAGEM RT3000 is just busy in performing a telephone, fax or
data call when calls come in. You can configure this for each type of call (voice, data,
fax) independently.
To change the setting enter the following sequence:
**67*
**67*
##67#
*#67#
Meaning:
<Telnumber> = the telephone number, the call will be forwarded to
<call_type> =
<call_type> =
<call_type> =
Both prefix commands
Both prefix commands
8.3.3

Call forwarding if no answer (CFNRy)

If call forwarding if no answer is activated, incoming calls will be forwarded to the
configured telephone number, if the call is not answered by a connected telecomms
equipment. You can configure this for each type of call (voice, data, fax) independently.
You can also configure the delay after the call is forwarded.
To change the setting enter the following sequence:
**61*
**61*
**61*
**61*
26
#
<Telnumber>
*
<Telnumber> <call_type>
11
: Incoming phone calls will be forwarded.
13
: Incoming fax calls will be forwarded.
25
: Incoming data calls will be forwarded.
* **
and
# ##
and
#
<Telnumber>
**
<Telnumber>
<delay_time>
*
<Telnumber> <call_type>
*
<Telnumber> <call_type>
<delay_time>
#
are supported to activate the service.
are supported to deactivate the service.
#
#
*
#
Description:
Activates for all call types
Activates for selected call
types (see below)
Deactivates call
forwarding if busy
Status Checking (see p.
30)
Description:
Activates for all call
types
Setting the delay after
which the call is
forwarded for all call
types
Activates for the selected
call types (see below)
Specifies the target
number, the call type
and the delay.
SAGEM RT3000