Frequency Band Selection Gsm 900, Dcs 1800, Pcs 1900; Identification - Sagem RT3000 User Manual

16.36 Frequency band selection GSM 900, DCS 1800, PCS 1900

Section: MOBILE_CONFIG
Meaning
Selects the GSM
frequency band
Setting Meaning
GSM 900 MHz only
DCS 1800 MHz only
DUAL_EU Autoselect 900/1800 MHz
DUAL_US Autoselect 900/1900 MHz
ALL Autoselect 900/1800/1900 MHz

16.37 Identification

Section: GENERAL
Meaning
Reserved
Reserved
SAGEM RT3000
Parameters in the file para.ini: advanced configuration
Parameter
BAND
Parameter
PRODUCT_CODE
VERSION_PARA_INI
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
Permitted values
GSM
DCS
DUAL_EU
DUAL_US
ALL
Do not change the factory
!
setting in the para.ini!
The RT3000 with 900/1800
MHz antenna should only be
used in 900 MHz or 1800 MHz
networks.
The RT3000 with 1900 MHz
antenna should only be used in
1900 MHz networks.
If you do not know, if your
GSM networks operates at
900/1800 MHz or at 1900 MHz
contact your GSM network
operator.
Setting
DNT8115
1.026
Factory Setting
ALL
105