Remote Configuration By Sms - Sagem RT3000 User Manual

Configuration methods
15.2

Remote configuration by SMS

You may change the file para.ini with a configuration SMS. You have to send a SMS to
the SAGEM RT3000 from a remote location. You can configure up to 5 remote stations
that are allowed to send a configuration SMS (see Settings for the configuration access
via SMS and FTP, page 85).
!
The character "_" occuring in section names has to be replaced by space character.
Example:
The SMS has to be in the following format:
#5 000000 SECTION,PARA,XX
#5
000000
SECTION
,
PARA
,
XX
#
!
The section and parameter you want to change have to exist in the para.ini file.
!
Configuration by SMS is only possible if in the section [DEVICE_ACCESS] the
parameter SMS_CONFIG=YES is set (Default).
82
#5000000CALL MUX,VOICE ALERT,B#
The command prefix informs the device that a configuration
setting is to be made.
The DEVICE PASSWORT protects your configuration against
intervention by others.
The command prefix and the access code together ensure that
accidental incorrect inputs do not change your configuration.
this specifies the section of the para.ini to which the parameter
belongs to.
( _ occurring in section names has to be replaced by space
character.)
separator
this specifies the parameter of the para.ini you wish to set.
( _ occurring in parameter names has to be replaced by space
character)
separator
These 2 characters or digits (alphanumeric) set the new value
for this parameter.
This character is the signal that the command ends here.
#
SAGEM RT3000