Call Forwarding If Not Accessible (Cfna) - Sagem RT3000 User Manual

##61#
*#61#
Meaning:
<Telnumber> = the telephone number, the call will be forwarded to
<delay_time> = the delay, after which the call is forwarded in seconds
<call_type> =
<call_type> =
<call_type> =
Both prefix commands
Both prefix commands
8.3.4

Call forwarding if not accessible (CFNA)

If call forwarding if not accessible is activated, incoming calls will be forwarded to the
configured telephone number, if your SAGEM RT3000 is not accessible in the GSM
network so that the call can not be answered by telephone, fax or data device. You can
configure this for each type of call (voice, data, fax) independently. You can also
configure the delay after the call is forwarded.
To change the setting enter the following sequence:
**62*
**62*
##62#
*#62#
Meaning:
<Telnumber> = the telephone number, the call will be forwarded to
<call_type> =
<call_type> =
<call_type> =
Both prefix commands
Both prefix commands
SAGEM RT3000
11
: Incoming phone calls will be forwarded.
13
: Incoming fax calls will be forwarded.
25
: Incoming data calls will be forwarded.
* **
and
# ##
and
#
<Telnumber>
*
<Telnumber> <call_type>
11
: Incoming phone calls will be forwarded.
13
: Incoming fax calls will be forwarded.
25
: Incoming data calls will be forwarded.
* **
and
# ##
and
are supported to activate the service.
are supported to deactivate the service.
#
are supported to activate the service.
are supported to deactivate the service.
Configuration
Deactivates call
forwarding if no answer
Status Checking (see p.
30)
Description:
Activates for all call types
Activates for selected call
types (see below)
Deactivates call
forwarding if not
accessible
Status Checking (see p.
30)
27