Sms Configuration; Select Port To Receive Sms; Configuration For Fixed Network Sms Protocol 1 - Sagem RT3000 User Manual

8.6

SMS Configuration

8.6.1

Select port to receive SMS

You can enter or read a SMS message either by AT commands through the PC port or
by using a telephone, being capable of fixed network SMS. You need to select the port,
where the SMS is delivered to. To change the setting enter the following sequence:
Default access code:
*5 ACCESS 019 01 #
*5 ACCESS 019 02 #
*5 ACCESS 019 03 #
8.6.2

Configuration for fixed network SMS protocol 1

If your telephone supports fixed network SMS protocol 1, please enter the following
sequence:
Default access code:
*5 ACCESS 027 1 #
Your fixed network SMS telephone needs the telephone number of the SMS centre.
Choose any number and configure this number in both, your telephone and the
RT3000.
For the configuration of the RT3000 please enter the sequence below:
Default access code:
*5 ACCESS 024
Meaning:
<SMS_Center> = the telephone number of the fixed network SMS centre
SAGEM RT3000
000000
000000
000000
<SMS_
Center>
Description:
Receive SMS on the
Phone port (fixed
network SMS)
Receive SMS on the
Fax/Modem/Phone port
(fixed network SMS)
Receive SMS on the PC-
port (Default)
Select Fixed net SMS
protocol 1
#
Enter the number of the
SMS centre for fixed
network SMS (Send /
Receive)
Configuration
33