Ports For Incoming Calls; Volume Of Voice Signal; To Select Ports For Incoming Telephone Calls; Volume Of Voice Signals In Telephone Calls - Sagem RT3000 User Manual

8.2

Ports for incoming calls; volume of voice signal

8.2.1

To select ports for incoming telephone calls

By default, the Telephone port and the Fax/Modem/Phone port will RING when a call
comes in.
To change the setting enter the following sequence:
Default access code:
*5 ACCESS 009 1 #
*5 ACCESS 009 2 #
*5 ACCESS 009 4 #
8.2.2

Volume of voice signals in telephone calls

You can adjust the volume of the voice signal which is sent to the remote party. You
can also adjust the volume of the voice signal which is received from the remote party.
To change the setting enter the following sequence:
Telephone port:
Default access code:
*5 ACCESS 001 VV #
*5 ACCESS 002 VV #
SAGEM RT3000
000000
000000
Configuration
Incoming phone call
is signalled on:
Only on Telephone
port
Only on
Fax/Modem/Phone
port
Telephone port and
Fax/Modem/Phone
port (Default)
Description:
Volume sent to
remote party
Volume of voice
signals received
from remote party
23