Gsm Speed; Early Connect Of Local Modem; Data Numbers - Sagem RT3000 User Manual

Parameters in the file para.ini: advanced configuration

16.30 GSM speed

This parameter sets the baudrate used on GSM to connect to remote modem.
(Depends on the network and your subscription.)
Section: MODEM
Meaning
GSM and remote
modem baudrate

16.31 Early connect of local Modem

If this parameter is set, the local modem starts to negotiate at the configured time,
independent of a GSM connect.
Section: MODEM
Meaning
Time between
dialing and start of
negotiation
(local connection
before GSM
connection)

16.32 Data numbers

These parameters force data calls for special numbers on outgoing calls (for modems
without correct calling tone)
Section: MODEM
Meaning
This number forces
a data call
102
Parameter
GSM_SPEED
Parameter
EARLY_START_LOCAL 0 to 60
Parameter
DATA_NUM_1
DATA_NUM_2
DATA_NUM_3
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
Permitted Values
2400, 4800, 9600
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
Permitted Values
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
Permitted Values
Number
(max 30 digits)
Factory Setting
automatic
Factory Setting
0
Factory Setting
090 (Spain)
SAGEM RT3000