Configuration For Fixed Network Sms Protocol 2 - Sagem RT3000 User Manual

Configuration
Example:
You have entered the SMS-Service-Centre number 0193010 in your telecomm
equipment, or this number has already been configured by factory setting. Please enter
the same number in the RT3000 as the SMS centre number:
*5 ACCESS 024 0193010 #
8.6.3

Configuration for fixed network SMS protocol 2

If your telephone supports fixed net SMS protocol 2, please enter the following
sequence:
Default access code:
*5 ACCESS 027 2 #
Your fixed network SMS telephone needs two telephone numbers to exchange SMS
with the SMS centre. One number to send SMS and one number to receive SMS.
Choose any number and configure two numbers in both, your telephone and the
RT3000. First configure the SMS centre number for sending SMS by entering the
following sequence:
Default access code:
*5 ACCESS 024
Meaning:
<SMS_Center> = the telephone number of the fixed network SMS centre
Then configure the SMS centre number for receiving SMS by entering the following
sequence
Default access code:
*5 ACCESS 026
Meaning:
<Local_Number> = the telephone number configured in your telephone set, to which
the RT3000 delivers received SMS.
34
000000
000000
<SMS_
Center>
000000
<Local_
Number>
Select Fixed net SMS
protocol 2
#
Enter the number of the
SMS centre to send
fixed network SMS
# Enter the local number
configured in your
telephone to receive
fixed network SMS.
SAGEM RT3000