Operation: Send And Receive Fixed Network Sms; In Case Of Error - Sagem RT3000 User Manual

Operation: Send and receive fixed network SMS

7 Operation: Send and receive fixed network SMS
If you have connected a telecomm equipment to the SAGEM RT3000 that is capable
of sending and receiving fixed network SMS (see note), you can use the fixed network
SMS (SMS = Short Message Service).
The RT3000 is a SMS centre for fixed network SMS. It can receive fixed network SMS
from a connected telecomms equipment and forward it through the GSM network to the
final recipient. It can also receive SMS from the GSM network and forward it to a
connected fixed network SMS telecomms equipment.
To receive fixed network SMS the device you use must be connected to the port on
which incoming SMS are delivered (Default: PC-port).
The function requires some configuration:
Do the following steps:
1. Select the port of the RT3000 to which incoming SMS should be
sent.
2. The RT3000 supports fixed network SMS in accordance to ETSI
standard ES 201 912 Protocol 1, Deliver mode 0 and Protocol 2.
Check if your fixed network SMS telephone supports Fixed network
SMS in accordance protocol 1 or protocol 2.
You should find the information in the user guide of the telephone.
May be that you have to ask your provider for these number.
3. Choose the right protocol in accordance to your telecomms
equipment.
Configure the SMS centre number for protocol 1 or SMS centre
number and Local number for protocol 2.
How to enter an SMS, how to send it and how you can receive a SMS is described in
the user guide of your telecomms equipment.
7.1

In case of error

Sending a SMS
20
In case of error the RT3000 can send an error report on the
telecomms equipment you have used to send the SMS. You can
activate or deactivate this function (see page 35).
page
33
33
SAGEM RT3000