Clir On/Off; Pin Number - Sagem RT3000 User Manual

Section: <Provider>
Meaning
Predefined Provider T-D1
Predefined Provider D2
Predefined Provider EPLUS
Predefined Provider VIAG
New Provider

16.22 CLIR on/off

When you make a call your telephone number will be presented to the remote party
when this function is supported by the network. You can disable this function by setting
the following parameter:
CLIR=NO.
Section: MOBILE_CONFIG
Meaning
Enable CLIR

16.23 PIN number

The PIN number is stored in the parameter SIMPIN=<Pinnumber>.
Section: MOBILE_CONFIG
Meaning
SIM PIN
SAGEM RT3000
Parameters in the file para.ini: advanced configuration
Provider name
i.e. myGPRS
Parameter
CLIR
Parameter
SIMPIN
Permitted Values
PDP_CONTEXT
PDP_CONTEXT
PDP_CONTEXT
PDP_CONTEXT
PDP_CONTEXT
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
Can be configured by DTMF (see page 80)
Permitted Values
YES, NO
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
Can be configured by DTMF (see page 80)
Permitted Values
Factory Setting
1,"IP","internet.t-
d1.de","0.0.0.0",0,0
1,"IP","volume.d2gprs.d
e","0.0.0.0",0,0
1,"IP","internet.eplus.de"
,"0.0.0.0",0,0
1,"IP","internet","0.0.0.0"
,0,0
PDP context as given by
the new provider.
Factory Setting
YES
Factroy Setting
empty
99