Installing The Rt3000 Modem Driver On A Windows-Pc - Sagem RT3000 User Manual

9

Installing the RT3000 modem driver on a Windows-PC

If you connect your PC to the SAGEM RT3000 via the RS-232 interface or via the USB
interface you have the following facilities:
•
access to the Internet via GPRS (page 52)
•
send and receive fax (page 59)
•
transmit and receive data (page 60)
•
send and receive SMS (page 61)
If you connect a Personal Computer to the SAGEM RT3000 via the RS-232 interface or
via the USB interface, you have to install the modem driver of the SAGEM RT3000 on
the computer.
!
If you connect a device to the RS-232 port of the SAGEM RT3000 and another
device to the USB port of the SAGEM RT3000, the USB port has priority. That
means the RS-232 port is switched off.
You want to connect the SAGEM RT3000
• to an USB plug of your computer, then install # 1. first the USB driver
• to a COM port of your computer, then install
Installing the
driver for the USB
interface
SAGEM RT3000
Installing the RT3000 modem driver on a Windows-PC
If you want to connect the SAGEM RT3000 to an USB plug of
your computer, you have to do the following steps:
The computer must not be connectd to the SAGEM RT3000.
1. Install the USB-driver for the SAGEM RT3000 on your
computer.
This driver creates a virtual COM port on your computer
that will be used by the modem driver you install
afterwards. During this process you have to install the
cable connection.
2. Install the modem driver for the SAGEM RT3000.
The following instructions show dialogues that are displayed when
doing the installation process on a computer running the operating
system Windows XP
(2000, ME, 98SE) do the appropriate steps.
Using Windows 2000 or Windows XP you must be logged in as
Administrator.
Follow the instructions below and those on the screen:
1. The SAGEM RT3000 must not be connected to your
2. then the modem driver
# only the modem driver
. If you have another Windows version
®
(page 48)
39