Connecting The Telecomms Equipment - Sagem RT3000 User Manual

Putting the device into operation
3.3

Connecting the telecomms equipment

To put the device into operation you have to connect at least
•
the power supply so that the device gets power
•
one telephone device, so that you can enter the PIN number.
Power Supply
PC via RS232
Power Supply
RS232 (optional)
USB (optional)
Telephone
Fax/Modem/Phone You can connect here analogue telecomm equipment, e.g.
10
PC via USB
Connect the Power Supply adapter here. Use only the Power
supply adapter supplied with the RT3000. Plug-in the Power
supply adapter into the mains socket.
Connect this interface with the COM port (serial RS-232
interface) of your computer, if you want to have access to the
internet or if you want to use your computer for fax and data
communication. If you connect a device to the USB port, the RS-
232-Port will be deactivated.
Default settings:
Transmission speed
Data bits
Parity
Stop bits
If you want to connect your computer via its USB interface
instead of its COM port to the SAGEM RT3000, please first
install the drivers and then plug in the USB cable.
You can connect here analogue telephones.
analogue fax machine (or a combi fax), analogue modem or
analogue telephones
Fax machine, Modem
or Telephone
Telephone
57,600 bps
8
N (none)
1
SAGEM RT3000