ACCESS
8.3.1
Call forwarding unconditional (CFU)
If call forwarding unconditional is activated incoming calls will be forwarded to the
configured telephone number. You can configure this for each type of call (voice, data,
fax) independently.
To change the setting enter the following sequence:
**21*
**21*
##21#
*#21#
Meaning:
<Telnumber> = the telephone number, the call will be forwarded to
<call_type> =
<call_type> =
<call_type> =
Both prefix commands
Both prefix commands
SAGEM RT3000
hook on the handset.
means: access code; by default it is
#
<Telnumber>
*
<call_type>
<Telnumber>
11
: Incoming phone calls will be forwarded.
13
: Incoming fax calls will be forwarded.
25
: Incoming data calls will be forwarded.
*
**
and
#
##
and
000000
#
are supported to activate the service.
are supported to deactivate the service.
Configuration
Description:
Activates for all call types
Activates for selected call
types (see below)
Deactivates call forwarding
unconditional
Status Checking (see p. 30)
25