Select Port For Incoming Sms; Select Baudrate For Debug-Rs232 - Sagem RT3000 User Manual

Section: DEVICE_ACCESS
Meaning
Activate power report
Telephone number for
sending power report to
16.4

Select Port for Incoming SMS

You can select where an incoming SMS should be routed to.
Section: DEVICE_ACCESS
SMS_PORT=A
SMS_PORT=B
SMS_PORT=C
Section: DEVICE_ACCESS
Meaning
Switch incoming
SMS to PC-SMS or
to analogue SMS
16.5

Select Baudrate for Debug-RS232

The baudrate of the Debug-Interface can be configured. The Debug-Interface is not part
of a standard product.
[SERVICE_IF]
BAUDRATE=57600
Section: SERVICE_IF
Meaning
Baudrate for debug
RS232
SAGEM RT3000
Parameter
POWER_REPORT
POWER_REPORT_NR
to the Telephone port (Landline SMS capable telephone set required)
to the Telephone port (Landline SMS capable telephone set required)
to the PC interface (Default)
Parameter
SMS_PORT
Parameter
BAUDRATE
Parameters in the file para.ini: advanced configuration
Permitted
Values
YES, NO
100 digits
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
Can be configured by DTMF (see page 80)
Permitted Values
A, B, C
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
Permitted Values
300, 600, 1200,
2400, 4800, 9600,
19200, 38400,
57600, 115200
Factory
Setting
NO
Factory Setting
C
Factory Setting
57600
87