Operation: Analogue Modem Connections - Sagem RT3000 User Manual

6

Operation: Analogue Modem connections

!
With an analogue modem connected to the Fax/Modem/Phone port of the SAGEM
RT3000 you can send and receive data to/from a remote modem being connected
to an analogue telephone line. Please install and operate the modem in accordance
to its user manual and the manual of the software you run on the computer
connected to the modem.
The called party can be a GSM modem or a fixed network modem.
!
If the called party's modem is connected to the fixed network, it should support
9600 bps (V.32) / V.42 for the connection into the fixed network. This is necessary
for the communication to the GSM network.
!
The SAGEM RT3000 supports
•
modem connections up to 9600 bps
•
modem connections according to the ITU-Standards V.21, V.22, V.22bis and
V.32.
Your modem should support MNP2 to ensure that no data are lost due to flow
control problems.
!
For data communication you can also connect your PC to the SAGEM RT3000
directly using this device as GSM modem (see details page 39).
!
You can configure the function according your needs. See Data Call Configuration,
page 32.
SAGEM RT3000
Operation: Analogue Modem connections
19