Call Waiting; Check Status For Call Forwarding, Call Barring And Call Waiting - Sagem RT3000 User Manual

Configuration
8.3.9

Call waiting

If the call waiting function is activated, during active telephone calls an incoming call
will be indicated by a signal tone.
To change the setting enter the following sequence:
*43#
#43#
*#43#
8.3.10

Check status for call forwarding, call barring and call waiting

When you check the status for call forwarding, call barring or call waiting, the status
will be indicated by signal tones from the telephone handset:
___ Beep ____ Beep
___ Beep _ Beep____ Beep
___ Beep_ Beep
30
Description:
Function activated
Function deactivated (Default)
Check the status (see p. 30)
Description:
Status on / DTMF code correct
Status off / DTMF code correct
DTMF code not correct or service not provided
by the network
SAGEM RT3000