Technical Specifications And Pinouts; System-Level Specifications; Table A-1 Sgi Ice X Series Configuration Ranges - Silicon Graphics ICE X User Manual

A.

System-level Specifications

007-5806-004
Appendix A

Technical Specifications and Pinouts

This appendix contains technical specification information about your system, as follows:
• "System-level Specifications" on page 107
• "D-Rack Physical and Power Specifications" on page 108
• "D-Rack System Environmental Specifications" on page 109
• "ICE X M-Rack Technical Specifications" on page 110
• "Ethernet Port Specification" on page 112
Table A-1 summarizes the SGI ICE X series configuration ranges.
Table A-1
SGI ICE X Series Configuration Ranges
Category
Blades per enclosure pair
Compute nodes per blade
Blade enclosure pair
Blade slots per rack
Compute blade DIMM capacity
Chassis management blades
InfiniBand switch blades
a. Compute blades support one or two stuffed sockets each.
Minimum
2 blades
a
1 compute node
1 per rack
36 slots (one enclosure pair)
8 DIMMs per blade
2 per enclosure pair
2 per enclosure pair
Maximum
36 blades
two compute nodes
2 per rack
72 blade slots (2 enclosure pairs)
16 DIMMs per blade
4 per enclosure pair
4 per enclosure pair
107