Table 1-2 Cpower Example Command Strings - Silicon Graphics ICE X User Manual

007-5806-004
Table 1-2
cpower example command strings
Command
# cpower system on
or
# cpower node on "r*i*n*"
# cpower node status "r1i*n*" Determines the power status of all nodes in rack 1 (except
# cpower system status
# cpower node on "r1i*n*"
# cpower system off
or
# cpower system halt
# cpower node halt "r*i*n*"
# cpower system on
# cpower node on r1i0n8
# cpower leader status
# cpower node off "r2i*n*"
See the SGI Management Center Administration Guide for Clusters, (P/N 007-6358-00x) for more
information on cpower commands and related ipmi style commands.
See the section "System Power Status" on page 23 in this manual for additional related console
information.
Status/result
Powers on all nodes in the system.
CMCs).
Provides status of every compute node in the system along
with all rack leaders.
Boots any nodes in rack 1 not already online.
Completely powers down every node in the system except the
admin. If you are administering the system remotely through
the RLC it may become unreachable (see the next example).
Shuts down (halts) all the blade enclosure compute nodes in
the system, but not the administrative controller server, rack
leader controller or other service nodes.
Boots or reboots all rack leaders and nodes in a system.
Command tries to specifically boot rack 1, IRU0, node 8.
Determines the power status of all rack leaders.
This command example issues an ipmi tool power-off
command to all of the nodes in rack 2.
Powering the System On and Off
11