Sim2 AR User Manual page 59

•
•
•
•
Connection Status is "No Connection" or "Unknow".
Set the IP Address Setup in DHCP or STATIC mode (if the choice is the STATIC mode insert
•
the IP ADDRESS, SUBNET MASK and the DEFAULT GATEWAY data). When done select the
APPLY SETTINGS feature through the ●
keypad on the back panel. Wait at least 10 second. Go back to the Setup menu and
enter again in the Network Settings submenu.
•
•
SIM2 BV International s.r.l
Wait a few moments in the submenu "Network Settings"
Return to the "Setup" menu, wait at least 10 seconds and enter again in the sub-
menu "Network Settings". Repeat this procedure for two or three times.
Restart the projector
If the problem persist, contact your SIM2 Authorized Dealer for assistance.
Restart the projector.
If the problem persist, contact your SIM2 Authorized Dealer for assistance.
button on the remote control or the O on the
AR User Guide 59