Operation; Web User Interface - Sim2 AR User Manual

Operation

USERL LAN
INTERNET
REMOTE CONTROL
Open the web browser on the PC and type the projector IP Address you find on the related
feature in the network settings submenu.
Note: The factory default mode for the IP Address Setup is DHCP.

Web User Interface

The projector Web Pages allows to remote control the projector through a Web interface.
The following diagram show how the web pages are structured.
The homepage of the Web User Interface is "Product Information".
SIM2 BV International s.r.l
Connect the projector to the LAN network
through the LAN connector on the back panel.
Enter in the "Network Settings" submenu. Make
sure that the hourglass disappear.
Control that the Connection Status is one of the
following:
AR User Guide 48