Virtual Rc; Miscellaneous Settings; Ethernet - Sim2 AR User Manual

Virtual RC

The Virtual RC Tab provides access to the projector through a virtual Remote Control interface.

Miscellaneous Settings

The Miscellaneous Settings section allows to take control of the following menu:

Ethernet

•
WiFi
•
Packet Logs Viewer
•
Software Update
•
Administration Login
•
Ethernet
The Ethernet tab allows to setup Ethernet connection parameters. It has got the same parameters of
the Network Settings submenu. This web page is useful to change the LAN settings through a
browser.
Select the DHCP box if the IP Address assignment of the projector has to be done from an
external DHCP server automatically. In DHCP mode IP Address, Subnet Mask, Default Gateway
are not selectable because the server automatically assign a reference number.
Enter the IP Address, Subnet Mask, Default Gateway if user need to insert the address manually.
IP Address: select an IP address
Subnet Mask: select subnet mask number
Default Gateway: select the default gateway of the network connected to the projector.
Note: if any change is done on IP Address or Subnet Mask or Default Gateway or the IP Address
Setup mode, press the OK button to make effective the new data.
SIM2 BV International s.r.l AR User Guide 53