Software Update - Sim2 AR User Manual

StbyProc: micropocessor dedicated to manage the standby projector status.
Bridge: sub-system that bridges any command or event, coming from an internal projector device or
external sources, to the appropriate internal projector device, able to manage this command
content or event.
MainProc: the main microprocessor in the projector. This one manages the OSD, the image
processing and lamp system.
ColProbe: the driver able to communicate with the color probe.
Possible Tags are:
HexCmd: command in hexadecimal format
Cmd: command in ascii format
SrvCmd: service command
EvInfo: internal event with "information" purpose
EvWarning: internal event with "warning" purpose
EvError: internal event with "error" purpose
Upgrade: events happened during the projector upgrade process
Any row in this web page shows an ID (number) and the time when the command or the event
happened. Any ID can have one o two rows. Typically any ID will have two rows, one is the request
and the other is the communication response.
The "Data" column shows the command or event content. These parameters are shown in JSON
syntax format (see www.json.org for more details, or our "Communication command protocol"
document to the following address www.sim2.com/home/en/downloads).
Use the page numbers arrow at the top of the list of the events to see the other lists.
At the end of the page there is the possibility to download, in csv format file, the filtered logs.

Software update

The Software update tab allows to update the projector software.
The web page shows the current software version of any microprocessor inside the projector. There
SIM2 BV International s.r.l AR User Guide 55