Download Configuration From Http; Upload Configuration - D-Link DGS-3000 series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
FTP Server IP
User Name
Password
TCP Port (1-65535)
Source File
Destination File
Click Download to initiate the download.

Download Configuration From HTTP

This window is used to download the configuration file from a computer to the Switch and updates the switch.
The fields that can be configured are described below:
Parameter
Destination File
Source File
Click Download to initiate the download.

Upload Configuration

The following window is used to upload the configuration file from the Switch.
To view this window, click Tools > Upload Configuration, as shown below.
Figure 12-11 Download Configuration – FTP window
Description
Enter the FTP Server IP Address used.
Enter the appropriate Username used.
Enter the appropriate Password used.
Enter the TCP Port number used.
Enter the file name for the FTP server to download, e.g. config.cfg.
Enter the file name that will be stored in the flash of the Switch, e.g. C:/config.cfg.
Figure 12-12 Download Configuration – HTTP window
Description
Enter the file name that will be stored in the flash of the Switch, e.g. C:/config.cfg.
Enter the location of the Source File, e.g. config.cfg, or click the Browse button to
navigate to the firmware file for the download.
302