Management > Snmp > Snmp Group Table Settings - D-Link DXS-1210-10TS User Manual

Key Type: Select the key type for the SNMP community. Select either Plain Text or Encrypted.
Community Name: Select an alphanumeric string of up to 32 characters that is used to identify members of
an SNMP community. This string is used like a password to give remote SNMP managers access to MIB
objects in the Switch's SNMP agent.
View Name: Enter an alphanumeric string of up to 32 characters that is used to identify the group of MIB
objects that a remote SNMP manager is allowed access to on the Switch. The view name must exist in the
SNMP View Table.
Access Right: Select the user's access rights from the drop-down menu:
Read Only - SNMP community members can read the contents of the MIBs on the Switch.
Read Write - SNMP community members can read and write the contents of the MIBs on the Switch.
IP Access-List Name: Enter the name of the standard access list to control access to the SNMP agent
using this community string.
Click Add to a new entry based on the information entered or Delete to remove the specified entry.
Management > SNMP > SNMP Group Table Settings
The SNMP Group page allows you to manage SNMP Groups. Access to SNMP OIDs and security policies
can be controlled on a per group
Group Name: Enter a SNMP group name of up to 32 characters.
User-based Security Model: Select the SNMP security model.
SNMPv1 - SNMPv1 does not support any security features.
Figure 4.45 – Management > SNMP > SNMP Community Table Settings
basis.
Figure 4.46 – Management > SNMP > SNMP Group Table Settings
D-Link DXS-1210 Series User Manual
31