Standard Rack Handle - Installation / Removal; Standard Rack Handle Installation; Standard Rack Handle Removal; Figure 127. Standard Rack Handle Installation - Intel R2000WF series Service Manual

Intel ® Server System R2000WF Product Family System Integration and Service Guide
7.3 Standard Rack Handle – Installation / Removal
The system includes a set of rack handles designed to secure a system into a rack or cabinet and to aid with
pulling systems from or pushing systems into a rack or cabinet.
Note: The system should never be carried by the rack handles. Intel recommends carrying the system using
two people supporting the system from the sides or to use a cart when moving the system from one location
to another.
7.3.1

Standard Rack Handle Installation

1. Locate the rack handles.
2. Align the rack handle with the three holes on the side of the server system.
3. Attach the rack handle to the server system with three screws using 8 in/lbf torque.
7.3.2

Standard Rack Handle Removal

Remove the three screws holding the rack handle to the chassis.

Figure 127. Standard Rack Handle Installation

Figure 128. Standard Rack Handle Removal

115